How To Maintain The Lithium Battery Of The Electric Bike?

Jun 21, 2019

Leave a message

The maintenance items are as follows:


1. For the first time, the lithium battery bicycle must be deeply charged. The battery can stop charging after the green light is displayed. The time is generally controlled within (8~10) hours.


2. Charge each time after riding to the battery pack, but avoid recharging after deep discharge (more than 90% of capacity), which will damage the lithium battery;


3. When the lithium battery bicycle is in the static state, the undervoltage indicator should be charged in time;


4, in the start, climb or in the face of the wind, should use the pedal to help;


5. Since the lithium battery has the characteristics of no memory, the battery pack should be charged regularly in each time or every day after riding;


6. If the lithium battery bicycle is placed for more than two months, it is necessary to perform a thorough charging of the battery pack; if it is placed for more than 5 months, a charge and discharge cycle is required;


7. Master the correct charging method. Connect the charger to the battery pack first, then connect the charger power plug to the 220V AC power supply. According to this connection sequence, the spark can be generated when the charging plug is plugged or unplugged. When the power is turned on, the charger displays a red indicator light;


8, to use a dedicated lithium battery charger (do not use the lead-acid battery charger directly), to fully match the lithium battery model. If the charger current is too large, the lithium battery protection system will be broken down, causing a short circuit, which may cause a safety accident of the lithium battery. The charger voltage is too low, which makes the charging efficiency low and takes too much time;


9. When the lithium battery is not in use, the power should be turned off in time, or the battery pack should be pulled out from the battery holder. Because the motor and controller still consume power under no-load conditions;


10, in order to ensure that the lithium battery pack is full, you should choose to charge at ambient temperature, so as to ensure the lithium battery charging effect is better;


11. The lithium battery can enter a sleep state under the condition of refrigeration. However, after the lithium battery is used under high temperature conditions (such as summer), the battery pack that is not removed can not be placed in the freezer immediately, but placed in a cool place, and the lithium battery is slowly cooled;


12. Due to the slight self-discharge phenomenon of lithium batteries, the power supply should be replenished frequently to ensure that the voltage of the battery is maintained in a stable state.

1560839124(1)


Send Inquiry